Integrated, paneled kitchen appliances

This space was designed using the older line of cabinets, but the overall concept can be achieved with the new line of SEKTION cabinets.

When designing the wall of high cabinets for the pantry and refrigerator, I made note of the Sub-Zero built-in refrigerator design requirements – rough opening width, cleat sizing, water supply and electrical placements, etc.

We purchased a panel-ready 36″ Sub-Zero. We also picked up a retro-looking exhaust grill from a parts supplier to complete the MCM look we were going for. In order to fit panels to the refrigerator and freezer door, we bought a 36″ wide x 92″ tall cover panel from IKEA and used a table saw to rip the panel into three pieces – one for the refrigerator door, one for the freezer door, and one for the space above the refrigerator. Finished edges were placed in the most visible locations, the refrigerator and freezer handles concealed a couple of the cuts, and we used iron-on edge trim from IKEA to hide the remainder.

Integrated, paneled kitchen appliances using IKEA AKURUM

We also ripped down IKEA deco strips to frame in the refrigerator and the top panel on either side. Since we were working with a 37″ rough opening and a 36″ wide panel segment, I ripped down the width of the cover panel and flanked it in pieces of deco strip. I would have preferred too have a single piece span the entire width, but you have to play the cards you’re dealt.

Integrated, paneled kitchen appliances using IKEA AKURUM

Integrated, paneled kitchen appliances using IKEA AKURUM

We also panelized a third party Bosch dishwasher using the IKEA dishwasher panel hacked to accommodate the Bosch-specific mounting requirements.

Integrated, paneled kitchen appliances using IKEA AKURUM

Integrated, paneled kitchen appliances using IKEA AKURUM

And, finally, we hacked a base cabinet to accommodate a microwave drawer. I used a piece of the old-style kick panel to trim out above the microwave. This small panel is held on using 3M plastic click connectors (the plastic Velcro stuff) so that it can be removed for cleaning the microwave.

Integrated, paneled kitchen appliances using IKEA AKURUM

~ Hacked by Spencer Guy

The post Integrated, paneled kitchen appliances appeared first on IKEA Hackers.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s