I just moved to a new condo and wanted a standout piece in my living room with a dramatic walnut face. But everything I liked was in the $4,000+ range! Inspired by other Kallax hacks I decided to make my own.
Here is the final product:
- A white Kallax Shelving unit
- 4 McCobb Mid Century Modern Feet 10″ tall from tablelegs.com (unfinished) + Angle Top Plates
- 1 sheet of walnut plywood form my local lumber supplier
- Rubio Monocoat Oil Plus for the stain (I used the Pure color)
- 2 drawer pulls from Home Depot
- 4 Euro style door hinges
- 2 cabinet magnetic catches from Home Depot
First thing I did was assemble the Kallax unit without the interior dividers and installed the walnut legs using the angle top plates:
The next step was to located the walnut plywood. I’ve researched my area and every supplier only sold 8′x4′ sheets so I had to buy a whole sheet for $109. While at the lumber shop I had them cut out two doors from a continuos piece where I liked the wood grain:
Buying the plywood..
The two cut pieces for doors:
I then installed the hinges and made sure that the doors worked. I had the doors cut a bit larger so it took some shaving off of the edges and sanding so that the doors can function. It is important to shave off any extra area from the OUTSIDE edges. This will prevent from ruining the continuation of the wood grain between the two doors.
Now it’s time to stain. I took off the two doors and the four legs and stained them with Pure Rubio Monocoat Oil Plus which leaves a nice finish without that fake shine. You should stain the backside first just to make sure you like the finish.
Here is one door stained and one before staining:
And the final Piece!